How To Install Blink Outdoor Camera To Mount. Use a pencil to mark the screw holes, and then drill these holes and securely screw the mount into position against the wall. Drill two holes in the wall, ensuring the screws will be long enough to go through the wall and the anchor.
How to set up blink sync module. Drill camera ethernet cable hole. Twist to remove the back cover of the floodlight mount and press the side buttons on the.
Please Note, Use Of The Included Screws For The Mount Will Create Two Holes In The Surface Of The Wall.
Brick masonry surface security camera installation guide step 1: To find the best place to install your blink camera, place it somewhere and then tap. Screw the camera bracket to the wall.
It Is Intended For Outdoor Use, Mounted On Exterior Walls Of The Home.
First, find a spot on your wall where you would like to install the camera. Anyway, here are seven easy ways you can install blink cameras without screws or drilling the surface. After that you have pertained to the ideal location.
Use A Pencil To Mark The Screw Holes, And Then Drill These Holes And Securely Screw The Mount Into Position Against The Wall.
Click here for instructions on how to add your outdoor camera to your account. Other blink outdoor cameras (xt or xt2) are not compatible with the floodlight. Next, use the two provided screws to attach the mount at your desired location.
Using A Hammer Drill And Masonry Bit, Drill The Pilot Holes In The Masonry For The Security Camera Mounting Screws.
My download speed is ok but the upload speed is not even up to 2 mg. Blink outdoor security camera features. Paint the stake black to match the camera and it would be very hard to detect, especially at night.
Add A Module To Your System Using The App And Place The Serial Number As Requested By The App Which You Will See On The Bottom Of The Unit.
Once you have secured all the required tools and accessories, you can start ahead with the mounting process. This adapter snaps into the opening on the back of the camera, as shown with dashed lines below. To add a blink indoor or outdoor camera, tap the plus symbol + on the app home screen.