th 171

How To Light Pilot Light On Valor Gas Fireplace References

How To Light Pilot Light On Valor Gas Fireplace References. My pilot light will not stay lit gas fireplace gas. Tap the switch until the pilot light ignites.

How To Light Pilot Light On Valor Gas Fireplace References
How To Light Pilot Light On Valor Gas Fireplace References from tatap22.educationinternationalfoundation.org

When i turned the fireplace on using. After lighting the pilot, continue to hold the control knob in for about 30 seconds, or the pilot may go out. First off, turn off the gas fireplace and pull out the front panel from the unit.

How Long Has This Been Going On With Your Valor Fireplace?

Do you know the model of your valor fireplace? A pilot light is a small flame that is kept alight using a steady, small stream of gas. How to light the pilot on a gas fireplace gas fireplace.

My Pilot Light Will Not Stay Lit Gas Fireplace Gas.

When i turned the fireplace on using. Turn the gas key to release gas to the burner. After lighting the pilot, continue to hold the control knob in for about 30 seconds, or the pilot may go out.

Using The Remote, Hold The Small Flame Button Until The Flame Goes Out.

Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren't using the fireplace. When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner. Pull the match or light away when the burner lights.

Turn On The Supply Line To The Gas Fireplace.turn The Gas Control Until The Pilot Setting Lines Up With The Hash Mark On The Outer Rim Of The Control.turn The Gas Key To Release Gas To The Burner.

Hold the control knob in for an additional 10 seconds to prevent the ods pilot from shutting off the gas while the thermocouple. Read and follow the instructions that came with your fireplace, because if you do not. Using the valor wall switch press the down button.

This Allows The Gas To Reach The Pilot Assembly.

Hold the gas control button down while you hold the end of a lighted match or lighter at the end of. This continuous flame is necessary to light large burners such as those found in gas fireplaces. You can adjust the flame height by turning the gas key.

Leave a Reply

Your email address will not be published.