How To Reset Ge Washer Deep Fill. If your washer senses a power spike or surge, an unbalanced load or a disruption in power, it will send a fault code to the motor and may require the motor to be reset.motor reset procedure: This should complete the motor reset.
You have 30 seconds to start lifting and lowering the lid. Unplug the washer for 1 minute from the electrical outlet. There are two ways deep fill can be used:
Do Not Pull The Knob While You Turn The Dial, Just Like When You Will Wash.
Plug the washer back in and raise and lower the lid 6 times within 12 seconds. You have 30 seconds to start doing this. Add a little more water:
How Do I Reset My Deep Fill Ge Washer?
Unplug the washer from the electrical outlet for 1 minute. This should complete the motor reset. You can now add laundry that you had taken out of the machine in step 1.
If Your Washer Senses A Power Spike Or Surge, An Unbalanced Load Or A Disruption In Power, It Will Send A Fault Code To The Motor And May Require The Motor To Be Reset.motor Reset Procedure:
Plug the washer back in and lift and lower the lid 6 times within a 12 second period. Add a little extra or fill the tub to wash the way you wa. Our ge deep fill turbo washer will not start after we press the start button and we can hear the lid lock clicking.
You Have 30 Seconds To Start Lifting And Lowering The Lid.
How to reset the ge washer. Raise the lid at least 2 inches and make sure it closes each time. Now, when the power is cut from the source, press the start/ pause button for five seconds.
Hereof, Why Does My Ge Washer Not Fill Up With Water?
Hold down the start / pause button for about 10 seconds and release it. Plug the washing machine back in and then within 30 seconds, quickly open and close the lid six times. To reset washing machines that use the ge hydrowave system, start by unplugging the washer for one minute.